Windows 10 (or 8.1) Easiest Way to Fix: INACCESSIBLE_BOOT_DEVICE

author evolne 24   3 год. назад
1,260,006 views

0 Like   0 Dislike

Windows 7/8/10: INACCESSIBLE_BOOT_DEVICE (4 QUICK Solutions Explored)

How to download media creation tool to begin where the video starts. Shows both download and creation of disk: https://www.youtube.com/watch?v=sSmANi2hTTc Startup Repair Demonstration: https://www.youtube.com/watch?v=z-HKlr_3o0Q How To Boot Into Safe Mode (Windows 10): https://www.youtube.com/watch?v=UraWD99HzRU Error: INACCESSIBLE_BOOT_DEVICE. Your PC ran into a problem and needs to restart. Your PC ran into a problem and needs to restart. We're just collecting some error info, and then you can restart. The INACCESSIBLE_BOOT_DEVICE bug check usually indicates that the Windows operating system has lost access to the system partition during startup. If this happens, the system usually shuts itself down after showing a blue screen or a stop error to protect itself from probable data corruption or loss. Then you see ‘Inaccessible Boot Device’, it means your computer cannot read the Windows partition on the hard drive it boots from. It could mean total hard drive failure. It could also be a simple driver or boot record failure too. Fortunately, a few simple troubleshooting steps can tell you exactly which cause is most likely. The INACCESSIBLE_BOOT_DEVICE bug check usually indicates that the Windows operating system has lost access to the system partition during startup. If this happens, the system usually shuts itself down after showing a Blue Screen or Stop Error to protect itself from probable data corruption or loss. The following errors will be addressed in this tutorial: - Inaccessible boot device windows 10 fix - Inaccessible boot device windows 10 - Windows 10 inaccessible boot device loop - Inaccessible boot device Windows 10 after update - Inaccessible boot device Windows - Inaccessible boot device Windows 8 Should work will all computer manufactures of the Windows 7, Windows 8, and Windows 10 manufactures (Dell, HP, Acer, Asus, Toshiba, Lenovo, Samsung, and so forth). If you receive INACCESSIBLE_BOOT_DEVICE error after you have upgraded to Windows 10, or after you used Reset in Windows 10, then this posts suggests a way to overcome the issue. The INACCESSIBLE_BOOT_DEVICE bug check usually indicates that the Windows operating system has lost access to the system partition during startup. If this happens, the system usually shuts itself down after showing a Blue Screen or Stop Error to protect itself from probable data corruption or loss. Here are a few suggestions you can try to resolve the issue. See what applies in your case: 1] If you think a boot device may at fault, you may need to edit the boot options. 2] Remove any recently added hardware. 3] Check if the disk firmware version is incompatible with Windows 10. If not, you may need to update to the latest firmware version. 4] If you recently added a driver, restart your computer, enter Advanced Boot Options menu, select the Last Known Good Configuration option. You may boot Windows 10 into Safe Mode and try a system restore or a Rollback. This tutorial will apply for computers, laptops, desktops,and tablets running the Windows 10, Windows 8/8.1, Windows 7 operating systems.Works for all major computer manufactures (Dell, HP, Acer, Asus, Toshiba, Lenovo, Samsung).

How To Fix Windows 10 Startup Problems [Complete Tutorial]

Windows 10 Startup problems are very common. This can happen for a number of reasons. In this tutorial, I will try to highlight a couple of suggestions on how to go about solving this issue. If you are experiencing common issues like Blackscreen, Bootloop, Infinite loading screen, or infinite boot this tutorial will be for you. This tutorial will apply for computers, laptops, desktops,and tablets running the Windows 10 operating system (Home, Professional, Enterprise, Education) from all supported hardware manufactures, like Dell, HP, Acer, Asus, Toshiba,Lenovo, and Samsung).

How to FIX : Your PC Ran Into a Problem and Needs to Restart | INACCESSIBLE_BOOT_DEVICE

FIX : Your PC Ran Into a Problem and Needs to Restart. We're just collecting some error info, and then we'll restart for you. (0%) If you'd like to know more, you can search online later for this error: INACCESSIBLE_BOOT_DEVICE Many times the following error "Your PC Ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you." makes a lot of trouble for you and it does not even let you login. It automatically goes into the infinite restart loop mode. So here is the solution. Eventually this error message stands for a very short time. So when you start your system, this error pops up like for a second and then suddenly restarts the system. So after the error pop up, immediately system restarts and then starts this "Automatic Repair". After sometime it starts "Diagnosing your PC" and finally when it finds out there is nothing to do more, comes up with these tow options "Restart and Advanced Option". So Before going into the Advanced option for resolving this issue, let me tell you why this situation comes.? There are multiple reasons which includes, 1) Changes in registry 2) Recent changes in Hardware of the system. 3) Any recent driver insatllation which went wrong. 4) Improper shutdown of the system which includes forcefull shutdown. Once you go to the "Automatic Repair" screen and Restart the system, it comes with the same error and end up there again only. So Go to the "Advanced Option". Select the "Troubleshoot" option. Here there are multiple options "Refresh your PC", "Reset your PC", "Microsoft Diagnostics and Recovery toolset" and "Advanced Options". Click on "Advanced Options" as the other options are not going to help you. Under the "Advanced options" there are again multiple options. "System Restore" which is help full only if you have created a Restore Point. "System Image Recovery" is help full only if the Image Recovery is created. Both these options are not going to help me here as i didnt created both. We already did "Startup Repair" and "Startup Settings" contains different options. So click on fourth option "Command Prompt" and from here we are going to restore the registry to the previous state prior to the changes. Go to following Location "C:\Windows\System32\Config\RegBack" and copy all the following files "Default", "SAM", "Security", "Software" and "System" to the previous directory that is "C"\Windows\System32\Config". Before copying these files to the Config folder, please take the back from Config folder. Once you restore the registry files, restart your system. And magically your system will start again normally. If you like the video, keep sharing the video and subscribe to the channel to get the future updates. Audio Tracks Used : 1. Follow Me 2. Dance Monster - Electronic Medium by Kevin MacLeod is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100272 Artist: http://incompetech.com/ 3. Hot Heat 4. Bomber (Sting)

[FIXED] Windows 10 Blue Screen: KMODE EXCEPTION NOT HANDLED ETD.sys

In this video I show how to resolve a common blue screen on Windows 10. Disabling the touchpad software resolves this issue.

Windows 10 Not Booting Up FIX [Tutorial]

If your Windows 10 computer is not booting up, this tutorial will be for you. Media Creation Tool (to boot computer from): https://www.microsoft.com/en-us/software-download/windows10 The Windows 10 boot process is quite simple. When your computer starts, the BIOS or UEFI Firmware is loaded, which performs a small set of checks on your hardware called the Power On Self Test (POST.) The BIOS then scans the hard disk master boot record, which loads an important file into main memory called WINLOAD.EXE. This kicks off the start-up process by loading the NTOSKRNL.EXE (NT Kernel, the heart of Windows) and HAL (Hardware Abstraction Layer.) Windows 10 then performs tasks such as initializing your hardware like your mouse and keyboard and reading the Windows Registry and user profile. If you see a black screen with gray text that reads “Windows Boot Manager” with an error along the lines of “Status: 0xc0000605 Info: A component of the operating system has expired,” then it means something went wrong with WINLOAD.EXE. This tutorial will apply for computers, laptops, desktops,and tablets running the Windows 10 operating system (Home, Professional, Enterprise, Education) from all supported hardware manufactures, like Dell, HP, Acer, Asus, Toshiba,Lenovo, and Samsung).

Short video on the easiest way to get your computer booting again if you are having this problem. It works in most cases, if not, you have a bad version and it will take a more complex process to fix.
I cannot guarantee success but this did personally work for me.
I hope your computer works again :)

Comments for video: