How to Repair Rust on Your Car Without Welding (No Special Tools Needed)

Published on Oct 28, 2017 8,851,183 views

Rust removal and repair. Repairing rust on your car is something that should be done quickly to prevent it from spreading. It can be easily done without welding, by using strong but inexpensive body filler. You can even paint the car yourself. Rust repair is common at the wheel wells and rocker panels of cars and in this video I show the proper and most thorough way to remove and repair rust.

Glass Filler: http://amzn.to/2zdSA6o
Gold Filler: http://amzn.to/2xtzWTx
Adhesive Remover: http://amzn.to/2zduvfU
Sandpaper: http://amzn.to/2gQph2b
Spot Putty: http://amzn.to/2yauidi
Body Patch Mesh: http://amzn.to/2iGmSri
Polish: http://amzn.to/2zcSOe2
Dust Mask: http://amzn.to/2xu4017
Sanding Block: http://amzn.to/2iaKNLM

Rust Converter: http://amzn.to/2iGmFo0
Rubberized Undercoating: http://amzn.to/2hmXD9N
Filler Primer: http://amzn.to/2xuIrxI
Color Matching Paint: https://amzn.to/2IYlFEP

Power Tools:
Rust Remover Disc: http://amzn.to/2zzXSq2
Polisher: http://amzn.to/2yT243Z

→ Become a ChrisFix Subscriber: http://www.youtube.com/subscription_c...
→ Instagram: https://www.instagram.com/chrisfixit
→ Facebook: https://www.facebook.com/chrisfix8
→ Website: http://www.ChrisFixed.com
→ My Channel Home Page: https://www.youtube.com/ChrisFix

**If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week**

Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. This video was supported by 3M and all opinions are my own. I use 3M products for my projects so this was a perfect fit for a rust repair video!

  • CoolPayson2004 _
    CoolPayson2004 _ Год назад bro you just earned a new subscriber!
  • ChrisFix
    ChrisFix Год назад Thanks a lot!
  • CoolPayson2004 _
    CoolPayson2004 _ Год назад ChrisFix ur welcome
  • Josh Myatt
    Josh Myatt Год назад CoolPayson2004 _ make that 2 more, nice vid👍🏻
  • Brian Murphy
    Brian Murphy Год назад CoolPayson2004
  • Brian Murphy
    Brian Murphy Год назад I love your videos
  • Christopher Smith
    Christopher Smith Год назад ChrisFix I have a rust hole on my Chevy s10 and when I go to my grandmas this weekend I'm going to replace it
  • Mike Hunt
    Mike Hunt Год назад cool bro
  • SapphireSumo6615/DFTW Official/Luke Thomas
    SapphireSumo6615/DFTW Official/Luke Thomas Год назад Hey dude, nice tutorials! I actually tried most of them out with my friend's '94 RX7, and they worked fabulously!
  • Damon Miller
    Damon Miller Год назад I've been subbed
  • Lloyd Dailey
    Lloyd Dailey Год назад your right in what your saying Chris ! that's why I fix the body on my car myself ! I just  can't afford to take it to the body shop !
  • clwaawazu
    clwaawazu Год назад subbed as well!
  • Marie Erline bruno
    Marie Erline bruno Год назад CoolPays
  • Vehiel Phantom
    Vehiel Phantom Год назад Dude u just hit 600 Likes of your comment i just Lke it im thr 600th Who Liked it
  • CoolPayson2004 _
    CoolPayson2004 _ Год назад Vehiel Plays thank you i’ll sub to u if u want
  • John Beer
    John Beer Год назад CoolPayson2004 _ my nigga for real bruh on momma's bruh I'm get a hurrrcut😭ahhhhhhh hahahah😂😂😂😂😂hahaha
  • CoolPayson2004 _
    CoolPayson2004 _ Год назад John Deer wut
  • C C
    C C Год назад crack cocaine is one hell of a drug... don't be like John Deer.. Just say No to the pipe.
  • C C
    C C Год назад Who is the new sub? lol I remember when his channel was tiny... its blown up. He's remade a lot of his videos.. Same info, same repair, same content. but better quality
  • John Beer
    John Beer Год назад Cliff. yeah u the meth head tlkn about no to the pipe but likes to get piped down by big dicks 😂😭 aahaahhh
  • cypress flats
    cypress flats Год назад You are 13, why are you watching this?
  • C C
    C C Год назад LOL yeah thats pretty funny..
  • CoolPayson2004 _
    CoolPayson2004 _ Год назад Emmy G. idk i just watch them for fun they are great tutorials though when i get a car i probably will use some of his tutorials
  • cypress flats
    cypress flats Год назад Haha, well that's pretty cool, I guess. :)
  • CoolPayson2004 _
    CoolPayson2004 _ Год назад Emmy G. ikr
  • Jo Lo
    Jo Lo Год назад CoolPayson2004 _ cool
  • Jo Lo
    Jo Lo Год назад CoolPayson2004 _ m t yum
  • Brian Jajalla
    Brian Jajalla Год назад hi everyone ,if anyone else wants to uncover electronics repair technician try Saankramer Electronic Magazine System (just google it ) ? Ive heard some extraordinary things about it and my neighbor got great success with it.
  • Joshua Swart
    Joshua Swart Год назад ChrisFix bro, your videos are really useful, now I can do small rust repair jobs on my dads 4x4 and car!
  • Bus boys and Airsoft
    Bus boys and Airsoft Год назад ChrisFix you are so cool can you do transver case fix video
  • jocelyn jimenez
    jocelyn jimenez Год назад CoolPayson2004 _ I
  • Miguel Anaya
    Miguel Anaya Год назад You earned more than one for sure, great work.
  • hradster
    hradster Год назад chris you have the best videos and those buzz it is the beauty always laugh btw is 11 years old
  • Who's yo Daddy?
    Who's yo Daddy? Год назад ChrisFix can u do mines next 😂
  • William Valmadre
    William Valmadre Год назад 2 subscriber
  • Josh Henson
    Josh Henson Год назад YaBoiPayson _ check out his other videos if you haven’t 😉
  • Nikhil Bhosale
    Nikhil Bhosale Год назад ChrisFix how do you prevent car from getting dirty by soil. Or How to stop soil from getting deposited in your car Please make video on it too.
  • Mark Butcher
    Mark Butcher Год назад YaBoiPayson _ agreed!!
  • Sauli Huovinen
    Sauli Huovinen Год назад Nice job. Thanks for this tips
  • Raegen jones
    Raegen jones Год назад Cool
  • Reinhard gaming
    Reinhard gaming Год назад Ilove you chris
  • Alex Wang
    Alex Wang Год назад Make that two new subscribers :D Loving your videos man!
  • Elleonor Reyes
    Elleonor Reyes Год назад YaBoiPayson _ I hate you I don’t even want you in the world 🌎 I know you were in the world 🌍
  • Elleonor Reyes
    Elleonor Reyes Год назад ChrisFix I loved your video and it looks really cool 😎
  • Alistair Whittaker
    Alistair Whittaker Год назад ChrisFix b B
  • Honda Bear
    Honda Bear Год назад I'm with ja
  • warddman
    warddman Год назад YaBoiPayson
  • El Yeti MX
    El Yeti MX Год назад Make it one more!
  • marichari monroig
    marichari monroig Год назад YaBoiPayson _ 9
    GOOD GUY MAD 11 месяцев назад ChrisFix YOu SAY zlOl
  • Nep Gang
    Nep Gang 11 месяцев назад YaBoiPayson _ hi
  • Jaiwaan Singleton Geary
    Jaiwaan Singleton Geary 11 месяцев назад ChrisFix this is dope man really good job, you just earned a thumbs up
  • Pa Carguy 1234
    Pa Carguy 1234 11 месяцев назад ChrisFix it looks beautiful
  • CoolPayson2004 _
    CoolPayson2004 _ 10 месяцев назад Bishalsharma Sharma sup
  • Nils
    Nils 10 месяцев назад Same here. Extremely informative. Cheers from Sweden
  • Beardoh Thebossman
    Beardoh Thebossman 10 месяцев назад This comment made me sub too.
  • rai x
    rai x 10 месяцев назад You are not too late to the party my friend!
  • GetRealSon
    GetRealSon 10 месяцев назад same as upper comment :P
  • Anthony Gordon
    Anthony Gordon 10 месяцев назад me too!!
  • Crockett
    Crockett 9 месяцев назад +1!
  • Jayden Wynter
    Jayden Wynter 9 месяцев назад I started watching yesterday and I already watch like 10 vids and I’m 10 so when I get older I will tandem drift with you :D
  • superman
    superman 8 месяцев назад 3 more. nice video
  • First Last
    First Last 7 месяцев назад Chrisfix For President ! America !! With Obama as Vice president ofcourse.
  • Louise Martin
    Louise Martin 7 месяцев назад Can you teach me how to drive a BMW please
  • Brad Davis
    Brad Davis 7 месяцев назад Where can I get one of these 3m kits do they come as a kit or separate items?? Great video need to do a little bit on my car
    ANONYMOUSCRACKER 7 месяцев назад K
  • Velocity Syx
    Velocity Syx 7 месяцев назад What year is your truck??
  • J3NS3N 76
    J3NS3N 76 7 месяцев назад How long did this take start to finish? Just so I have an idea how long I can expect it to take.
  • Jetmir Haxhija
    Jetmir Haxhija 6 месяцев назад Ljh
  • Watermelon - Topic
    Watermelon - Topic 6 месяцев назад Big like for you 👍🏻
  • HondaMan Vtec
    HondaMan Vtec 6 месяцев назад Can you film the car now ?
  • Hosam Aldabet
    Hosam Aldabet 5 месяцев назад one more here, thank you bro !
  • Village TV
    Village TV 5 месяцев назад 💝💚 COOL VIDEO! 💝💚
  • Jim LePeu
    Jim LePeu 5 месяцев назад Lots of rusty car owners 😆😆😆😆🏴󠁧󠁢󠁥󠁮󠁧󠁿
  • royzcustomz
    royzcustomz 5 месяцев назад use metal is all i got to say.
  • Silage man
    Silage man 4 месяца назад Is there any job he can't do
  • Downhomer1122
    Downhomer1122 4 месяца назад U are the best
  • Car Groves
    Car Groves 3 месяца назад Right? I'm doing a ton of rust repair right now on my channel. I watched this for motivation haha
  • Dillan Dolly
    Dillan Dolly 2 месяца назад More than one!
  • Ian Buell
    Ian Buell 4 недели назад Same here. I subscribed on this video. Great tutorial!!!
  • DIY Tech
    DIY Tech 3 недели назад this guy is an alien
  • DeMario Brown
    DeMario Brown 3 недели назад and another one..
  • Fir
    Fir Год назад Body shops HATE him!
  • Captain Lag
    Captain Lag Год назад Fir And rightfully so!
  • Alex Ramirez
    Alex Ramirez Год назад **I Bet dealerships and big mechanic name HATE him!
  • Nick Faber
    Nick Faber Год назад TheGriz what???
  • Michael Taylor
    Michael Taylor Год назад Click Here To Learn His Secret!
  • Calvin Wong
    Calvin Wong Год назад Ammy NYC. that porsche restoration of his whole car is indeed professional. but you comparing a whole classic car to daily driver type of car.
  • videogamebomer
    videogamebomer Год назад Alex Ramirez and small mechanics. All fucking criminals
  • CoolKoon
    CoolKoon Год назад (изменено) Thanh Le Okay, I agree that that's on a completely different level. But do you honestly think that all the body repair shops strip the old paint completely even when fixing minor damage (e.g. a chipped stone)? Because I don't.
  • AlanChavezDawg
    AlanChavezDawg Год назад Blind Bandit Lol but in the end by the time the car has rusted to a terrible state, the car is no longer driven so its not even bothered with and left like that.
  • Erik Gonzales
    Erik Gonzales Год назад Fir lol how??
  • William Valencia
    William Valencia Год назад 1,000 body shop owners downvoted this video
  • just-mark
    just-mark Год назад Car owners love him, Body shops HATE him! Learn how to remove rust from your car in only 1 week.
  • Fir
    Fir Год назад Jesse W Hey don’t hate, this isn’t a professional mechanic shop tutorial session in here, it’s an automotive enthusiast channel making content for automotive enthusiasts. Plus i’m not sure why a mechanic of 35 years would even bother watching videos of a mechanic who’s not even 35 years old himself lol
  • videogamebomer
    videogamebomer Год назад Landon Wynia And in those shops theyll break your car even more to charge you more
  • ChrisFix
    ChrisFix Год назад Nawwww, how can someone hate meeeeee.
  • Tigea Benton
    Tigea Benton Год назад Rasmus Rasmussen What's the right way? You have a video?
  • Muay Thai
    Muay Thai Год назад ChrisFix I fucking hate u so bad
  • Dumm Brod
    Dumm Brod 8 месяцев назад Lmao...I bet.!🤡
  • Jon Remmers
    Jon Remmers 7 месяцев назад Err, no. Body shops are actually quite happy not to bother with customers not prepared to pay for their work. Saves time. But the funny bit is the products used in this clip cost enough to pretty much balance what a pro might charge. Your own working time not accounted for. So I do not know whos fooling who here.
  • sten260
    sten260 7 месяцев назад tbh even if you know how to do it perfectly most people would still take their car to body shop just to save time, unless you broke af
  • joe c
    joe c 6 месяцев назад Actually we love him worst job in a body shop is rust repair because people don't wanna pay to do correct well 99% of them. So by all means repair it yourself
  • Donaramu
    Donaramu 3 месяца назад @sten260 Most of the world is broke af. Putting life on credit, enslaving themselves to their debt masters.
  • sten260
    sten260 3 месяца назад @Donaramu if they are broke af they should sell the car and take a bus
  • Lady bird
    Lady bird 3 месяца назад @videogamebomer how so? Because we learned how to do for free what you paid to get schooling for? I fix my car all the time without a licensed mechanic. Just did water pump and two new brake lines. Works 👍 great. Also did plug cables ignition coils and plugs. Did my timing belt with a haynes auto book then sold the truck. There is nothing criminal about fixing your own or friends/family members cars. U just mad cuz we dont wanna pay you $60 an hour to do almost nothing. A water pump replacement literally takes 20 minutes and the part is $35 on rock auto. Why would I pay you $250 to do something so simple?
  • videogamebomer
    videogamebomer 3 месяца назад @Lady bird read my comment again but slowly. I'm saying it better to do it yourself
  • Soboparla00 7
    Soboparla00 7 2 месяца назад @Michael Taylor I clicked, why isn't working?
  • Κώστας Λεούσης
    Κώστας Λεούσης 2 недели назад Fir they love him because the rust will come back in 2-3 years and then it has to be welded ! ( he used rust reformer on the I side which lasts 6-12 months then the rust comes back ) see Eric the car guys video where he done the same and he showed how it looked like after a year. He did the same procedure and he used the same products
  • Cars N Guitars Bret Bunton
    Cars N Guitars Bret Bunton Неделю назад Not exactly.... lol. That looked ok for a DIY repair. But it's definitely not retail quality
  • Fatton Vaksi
    Fatton Vaksi 1 день назад Noo, he do this just for sale this car so the other can see nice and clean, but that spot after a few months will show up again! He just cover, but he din't stop the rust. If you give it this to body shop they would cut that spot of rust and put new metal on it.
  • Owen Bame
    Owen Bame 4 месяца назад walks up to families car breaks huge chunk off body
  • Luke Daniel
    Luke Daniel 4 месяца назад Lol
  • Dave
    Dave 4 месяца назад Boo yeh
  • Ron R
    Ron R 3 месяца назад My dad. Has the ultimate set of tools. I can fix it...
    MLG_420 QUICKSCOPE 3 месяца назад Lmao
  • Aaron Trupiano
    Aaron Trupiano 3 месяца назад winstars were recalled because the rust problems were soo bad. our old one had the front axle or something (i forget) fall off when it was towed away.
  • Ke Ra
    Ke Ra 3 месяца назад “This type can’t be repaired without welding” rips huge chunk off before making a video about fixing rust without welding
  • pocetbox
    pocetbox 3 месяца назад tat sounds like parenting
  • AuSTin DArgA
    AuSTin DArgA 2 месяца назад thats why we sold our 99 f250 7.3 diesel, the body was basically falling off...
  • Leon thecat
    Leon thecat 2 недели назад @Ke Ra The lesson today was, to fix it before it gets that bad, so you don't need to weld.
  • Carlos Matos
    Carlos Matos Неделю назад It's okay, Chris Fix aka Auto Wizard to the rescue!
  • Leon thecat
    Leon thecat Неделю назад @Carlos Matos Chris is the the best mechanic on YouTube. Bar none!
    STEAM SCREAMER 3 месяца назад Has angle grinders, drills and powered sanding tools, does it all by hand just to give us the experience. Now that is some honest work... Awesome vids man
  • ChrisFix
    ChrisFix 3 месяца назад The idea is to show you those tools make it way easier but you can get the job done by hand!
  • Owen Simpson
    Owen Simpson 2 месяца назад Honestly, that's what I love about him. He shows that you can do all of this at home, I'm about to start working on my girlfriend's hybrid battery in her Honda Civic and he has a video on how to replace hybrid batteries that I watched yesterday to prepare.
  • Salvatore Dimartino
    Salvatore Dimartino 2 месяца назад Salvatore
  • yeeaahBUDDY
    yeeaahBUDDY 2 месяца назад ​@Salvatore Dimartino Hodor
  • Vadim Bellous
    Vadim Bellous 1 месяц назад I own a body shop and there is no way all of that was sanded by hand. You won't be able to get all the rust without using an angle grinder and probably a die grinder that's why all the jump cuts..
  • Tanner Huizinga
    Tanner Huizinga 1 месяц назад im skeptical... look at the grind marks on that panel and who wouldnt use a grinder on the inside of the wheelwell. no judgement
  • mowens07 Gaming
    mowens07 Gaming 1 месяц назад You got yourself a 200th like.
    STEAM SCREAMER 1 месяц назад Nice, thx guys
  • Owen Bush
    Owen Bush 1 месяц назад Vadim Bellous work harder.
  • Johnny Doggs
    Johnny Doggs 1 месяц назад Vadim Bellous don't b hatin
  • Zac Hardman
    Zac Hardman 1 месяц назад @Vadim Bellous good eye mate i noticed this aswell
  • Lily is big ol silly
    Lily is big ol silly 1 месяц назад It ain't much but it's honest work
  • Adil Saleem
    Adil Saleem 4 недели назад @Vadim Bellous two words= sanding marks
  • asfdaffgwetqwfdafwdaqfg
    asfdaffgwetqwfdafwdaqfg 4 недели назад @Vadim Bellous yeah thats exactly what i was thinking, jump cut and then it looks exactly like he used a power tool lol, but thats fine he makes a ton of videos it would have taken all day to try to get that out by hand lol, He probably could have gotten all the rust out by hand if he used a Wire brush which he didn't show though
    DONQKM 3 недели назад A@Vadim Bellous Agree 100%...
  • Lamp Shade
    Lamp Shade 3 недели назад If you think he didn't us power grinders you're naive
  • Leon thecat
    Leon thecat 2 недели назад Chris is the real deal. He will show you how to do it right without hemming and hawing about what you could do, if you wanted to do it right. He always does a first class job.
  • Cara Nuding
    Cara Nuding 1 месяц назад I’m 59 year old woman never did this kind of work before but Followed your directions and my truck turned out awesome😊👍🏼 thank you for the help
  • HostileLemons
    HostileLemons 1 месяц назад Excellent!!!
  • Regis Manglay
    Regis Manglay 1 месяц назад 👍👍👍
  • JJ James
    JJ James 1 месяц назад That’s great!
  • Amazing Grace
    Amazing Grace 1 месяц назад So proud of you
  • Corruptedbrain
    Corruptedbrain 1 месяц назад Interesting experience!
  • Faze Clorox
    Faze Clorox 1 месяц назад Congrats
  • hatem slama
    hatem slama 3 недели назад Encouraging! Good.
  • MTN 94
    MTN 94 3 недели назад The rust will come back tho..
  • Johnny Cage
    Johnny Cage 3 недели назад 👍
  • Louchesjon
    Louchesjon 2 недели назад You’re better than my mother. (She’s 56)
  • MrGaming Djthebeast
    MrGaming Djthebeast 2 недели назад Fucking old bag
  • natedog2025
    natedog2025 2 недели назад @MTN 94 nope! did this and got it rust proofed awesome!
    AMIN ABELL ALVARADO AGUERO 2 недели назад 59 years young!! Hell yeah!.
  • Carlos Matos
    Carlos Matos Неделю назад @MrGaming Djthebeast Fucking loser virgin basement dweller
  • twicebitten thasme
    twicebitten thasme Неделю назад @Carlos Matos Aw, man. Just because he has to wear a helmet on his helmet, doesn't mean he's a loser. He's simply mentally deficient and challenged. Oh, who am I kidding? He's even less than a loser. Maybe his mommy will give him a hug to make him feel real important again, the next time she brings him a sandwich (with the crusts removed, of course...)!
  • Anthony Newman
    Anthony Newman Неделю назад @MrGaming Djthebeast really witty. Slow clap
  • Solar Flare
    Solar Flare 4 месяца назад Mom....... Chris make a hole on the minivan. WHATTTTT.
  • Moji Bg
    Moji Bg 1 месяц назад That was so cool
  • Matt Zasso
    Matt Zasso 3 месяца назад This dude has the balls we all need in the garage
  • Derfoklishe
    Derfoklishe 1 месяц назад Why balls? I mean, even if you screw it up, you can take it to a professional to fix your mess.
  • Corruptedbrain
    Corruptedbrain 1 месяц назад Derfoklishe i need balls too
  • lil ballsak
    lil ballsak 2 недели назад @Derfoklishe if you have enough money
  • It’s Reyvo Young
    It’s Reyvo Young 4 месяца назад Ya know what's better than Wooder? Soapy Wooder
  • Mafia Studios
    Mafia Studios 4 месяца назад You just copied me
  • darren lockier
    darren lockier 4 месяца назад In Australia we say warda
  • Jim Townsend
    Jim Townsend 4 месяца назад Yep...Wooder Ice! OK, so I'm originally from Philly. Yo!
  • nofuxgvn
    nofuxgvn 1 месяц назад In Maryland, the eastern shore says Wooder and the western shore says Wadder.
  • Jeffrey L
    Jeffrey L Неделю назад I've got Wooder on discount now. 15$ / gal
  • Arden Kristoff Castillo
    Arden Kristoff Castillo 2 дня назад It's soapy water not wooder.
  • Moola Moose
    Moola Moose 4 месяца назад Funny how there's a bunch of professional body guys in the comments crying over how this isn't a "professional" job that "isn't done right" and "you need to cut out the rust and weld new sheet metal in." Even though the entire point of the video is that you can fix rust without needing to weld new metal on, because most people don't even own a welder so that point is obselete. It's literally just a cheap fix, it's clearly not meant to last forever and is obviously far from professional grade body work. Nobody wants to spend thousands of dollars on a car that's probably not even worth as much as the quote will be.
  • ChrisFix
    ChrisFix 4 месяца назад I’m glad someone gets it! Thanks man.
  • John Foreman
    John Foreman 4 месяца назад Moola Moose exactly. There’s lots of people with cars that don’t really warrant an expensive professional job, but still want a decent appearance. I mean, you wouldn’t use this on a Rolls, but pretty good for a back yard job.
  • Moola Moose
    Moola Moose 4 месяца назад @John Foreman you are 100% correct. I'd do this to the truck I bought for 1,000 bucks instead of spending 3,000 on a professional repair job.
  • John Foreman
    John Foreman 4 месяца назад Moola Moose ha that’s what I mean. People just have to shit on something don’t they. The guy did a pretty damn good job at explaining how to do a relatively cheap job I think.
  • Moola Moose
    Moola Moose 4 месяца назад @John Foreman He did an excellent job, I've been professionally trained in paint work and this is an extremely accurate video.
  • Viper JC
    Viper JC 4 месяца назад @Orange Juice after you've brought the area back to bare metal you should use a rust conditioning solution or a rust inhibitor, only sealing the rust with primer means that it will just lift all the coats you've put on when the rust starts to spread again.
  • Viper JC
    Viper JC 4 месяца назад @Orange Juice yep
  • The Boss
    The Boss 3 месяца назад I went to get a quote to fix my car rust and it was 7000$!!!! Which is crazy because my car is only worth 4000$ , it’s a 2009 Honda Accord coupe. Like I rather fix it all by myself for about 100$ ( I don’t have any of these tools) and just be happy with my results
  • Dat Boii
    Dat Boii 3 месяца назад I think this repair is pretty professional, if he had more experience with the body filler it would have come out perfect
  • PeskeKustoms
    PeskeKustoms 3 месяца назад I went to school for bodywork and did Custom work in south Florida for a while building concours pebble beach cars in which yeah I agree this would be a no no, but for a damn Mazda 3 why the hell not lol. Not a structural piece anyway.
  • Donaramu
    Donaramu 3 месяца назад @Moola Moose I paid 1500 for a work Truck. It would cost thousands to repair all of the rust. I don't care if it's messed up, I just don't want it to look like a pure junker when I pull up. This won't work well for my rockers. But I bet it would for my cab corners.
  • William Lafre
    William Lafre 2 месяца назад (изменено) Shitty job you will get shitty results. Plus Vw are shitty o my bad it's a dodge.
  • William Lafre
    William Lafre 2 месяца назад But if you can sand rust down an spray rust protector. You will be fine. Like this video. Everything is cheaper if you do it your self. Why I went to school for autobody repair. I was that guy. That crashed into cars for fun .
  • William Lafre
    William Lafre 2 месяца назад @The Boss call insurance get full coverage an keep that 7 gs wait is that illegal
  • William Lafre
    William Lafre 2 месяца назад To keep a body line use tape
  • Sandi Howe
    Sandi Howe 2 месяца назад If I can do this for less than the $500 a fly by night company or a $5k job the high end body shop is quoting, then by all means. I will try it. I appreciate everything you show us Chris. I am a classic DIYer! I try to fix everything myself first because... "I think I can, I think I can" often turns to I knew I could! It's either this and/or a vinyl wrap - but you at least have to fix the rust first so...
  • David DeNero
    David DeNero 1 месяц назад Why even fix it anyway...!??? What's being done in video is still a ton of work and ton of materials on a "car that's probably not even worth as much as the quote will be!"...
  • VortechBand
    VortechBand 1 месяц назад Well, some of the tools used in most of the videos are worth quite a bit of coin, and not something someone's going to have laying around their garage unless they work on cars monthly/weekly.
  • joe branch
    joe branch 4 недели назад @David DeNero i think its all on the owner. He probably loves his car and has sentimental value towards it.
  • R4CEMODERATOR HERMUNSTAD Hermundstad Andersen
    R4CEMODERATOR HERMUNSTAD Hermundstad Andersen 3 недели назад I know somebody hoo spoted som rust on their car and want too fix it them self👍 why spend 1000sends of dolars when you can do it your self
  • joe branch
    joe branch 3 недели назад @R4CEMODERATOR HERMUNSTAD Hermundstad Andersen i agree fixing the floor on my firebird. They want a 1000 at the shop. Its only a v6. So im doing the job myself👍
  • R4CEMODERATOR HERMUNSTAD Hermundstad Andersen
    R4CEMODERATOR HERMUNSTAD Hermundstad Andersen 3 недели назад @joe branch i know its crasy pricec for something you can do your self
  • Leon thecat
    Leon thecat 2 недели назад Welded repairs don't last forever either. Sometimes a Bondo job can outlast the pro job. I have seen it happen.
  • kof ola
    kof ola 2 недели назад @David DeNero Because it is not about the value of the old car. It is about the price of a new car you have to get instead. Repair of the old car pays off as long as the cost of repair is not bigger than the cost of a new car.
  • Steve1967
    Steve1967 2 недели назад You don't even have to weld sheet metal on. Just rivet it and putty over it.
  • alberto ascari
    alberto ascari Неделю назад (изменено) Although these repairs can break away eventually ive bought great looking cars only for the paint to bubble and slowly rust and the repairs to collapse. If you can do a bit of metal working and use a mig welder and use metal patches with stone guard it can pay of with permanent repairs . For cosmetics this is adequate. On non corroded metal this is excellent but wheel arches rust from the inside on the unpainted areas were the mud collects so fibre glass may not hold long term. If you buy a car repaired like this be ready for a dissapointment. I brought a great twin cam Lancia Sedan only to find the great paint work hid a body with 30% car filler and it also had accident damaged alloy wheels that couldnt be balanced although they were cosmetically perfect.That cosmetically nice looking car could be a wreck
  • James Taylor
    James Taylor Неделю назад I'm stoked to try this. I have a 20 year old explorer in pretty good shape but does have some small spots. The value per Kelly is only $800. Why spend money I don't have when I can learn something new give myself a project?
  • Happy Cynic
    Happy Cynic 6 дней назад It's true. My Dodge is worth 4k. Think I'm gonna spend 1200 to fix 4 inches of fender rust?
  • Moto Mortus
    Moto Mortus 2 дня назад @joe branch exactly. I have a 2003 jeep wrangler 4.0. Not the most amazing car, but it was my fathers that he left to me before he passed, he was always proud of it, and took good care of it. I will fix, and spend WAY more then most would think "reasonable" for a 03 jeep to make sure when I pass it down to my son it looks just as good as the day my father bought it. "Value" isn't something that can always be quantified in monetary terms.
  • joe branch
    joe branch 2 дня назад @Moto Mortus well said sir👍👍
  • Karina Sosa
    Karina Sosa 6 дней назад almost half of fender disappears from sanding Now this looks AWESOME!
  • spiralnapkin
    spiralnapkin 1 месяц назад This is by far the best home car repair channel I've ever seen.
  • Drewbie UnderFire
    Drewbie UnderFire 2 недели назад You aren't kidding, this guy is the man. Perfect explanations and honesty
  • Jalen Robinson
    Jalen Robinson 1 месяц назад He can make a 5 hour video and I swear I would watch it through on accident.
  • Carlos Matos
    Carlos Matos 4 дня назад I watched his how-to vid on changing out a Prius battery... even though I have never owned one or plant to lol
  • host_runner
    host_runner 1 месяц назад (изменено) My spreader snapped in two when I bent it to get the dry filler off, it was funny and sad at the same time.
  • Jona van der Pal
    Jona van der Pal 3 недели назад RIP spreader :-(
  • JustInCaseIGetCaught
    JustInCaseIGetCaught 1 месяц назад ChrisFix doesn't call himself a professional body worker, but his results are similar and yet better!
  • Rodwell Media
    Rodwell Media Год назад (изменено) I HAVE TO DO THIS TO MY WHOLE CAR
  • Veeti Jaakkola
    Veeti Jaakkola Год назад Rodwell Media man just buy new panels, sure itll cost you but it saves a ton of work
  • Rodwell Media
    Rodwell Media Год назад Veeti Jaakkola it’s kinda hard because it’s form 1969
  • vimtut0r
    vimtut0r Год назад Haha me too
  • arekb5
    arekb5 Год назад Ikr? Why aren't they making cars entirely of body filler? It would be so much easier.
  • vimtut0r
    vimtut0r Год назад (изменено) Better: why dont they use stainless steel? (too expensive). But I think somehow the manufactur needs to motivate the customer to get a new car some time :D
  • Ketsuora
    Ketsuora Год назад Rodwell Media good luck dude
  • Roderickspeeder
    Roderickspeeder Год назад vimtut0r Stainless steel also weighs too much that's why car makers don't use it on their cars. They instead apply galvanising treatment before paint which prevents rust bit better than without.
  • Khan Roberts
    Khan Roberts Год назад Rodwell Media cool what scrap yard did you pick it up LMAO
  • Rodwell Media
    Rodwell Media Год назад THANKS I NEED IT
  • João Maurício Basile de Souza
    João Maurício Basile de Souza Год назад arekb5 I was thinkin' 'bout the same thing. And they shoul also have a plane made entirely of black box, cuz it's the only thing that handles a plane crash...
  • Rodwell Media
    Rodwell Media Год назад (изменено) White Supremacy I might do that
  • UwU
    UwU Год назад U own a miata??
  • NkTheGamer
    NkTheGamer Год назад Rodwell Media just scrap the parts and buy a new car xD
  • ThePointlessBox_
    ThePointlessBox_ Год назад vimtut0r stainless is heavy is fuck Plus it's a bitch to make shit out of it if you want to mass produce a stainless steel product Basically multiply the car price by two
  • kraabzz
    kraabzz Год назад Muntahi Talha from 1969?
  • maxreaper25
    maxreaper25 Год назад arekb5 definitely not safe haha
  • blocki
    blocki Год назад Chrysler or Jeep?
  • [KYS]
    [KYS] Год назад At this point in time, rust is the only thing holding my car together.
  • ninja dragon
    ninja dragon Год назад Rodwell Media may i ask, is it a Volvo?
  • T Hanks
    T Hanks Год назад arekb5 corvettes
  • Eagle Random
    Eagle Random Год назад Rodwell Media at this point you take it to a paint shop
  • alex pencek
    alex pencek Год назад You don't have a car. I looked on your channel and you look like your 13
  • Rodwell Media
    Rodwell Media Год назад alex pencek how about you actually look through my video and you will see that I have a 1968 Toyota crown
  • Rodwell Media
    Rodwell Media Год назад White Supremacy 14
  • Rodwell Media
    Rodwell Media Год назад ninja dragon no Toyota crown
  • SlowDragon
    SlowDragon Год назад thAts my boi
  • Skywtaker
    Skywtaker Год назад Rodwell Media yea but doing this saves money just work in one panel then to the next one another day
  • uknow who u messing with
    uknow who u messing with Год назад Rodwell Media Jesus,dude what did you do to your car
  • MC Productions
    MC Productions Год назад More power to you Rodwell Media
  • Matt Sullivan
    Matt Sullivan Год назад Rodwell Media new panels for a 1969 anything should be plentiful
  • Maxime B
    Maxime B Год назад Yeah no his way is so much more complicated
    JDM CAR and MOTORCYCLE Год назад Rodwell Media it’s. Good me too
    LEO LIFESTYLE Год назад Same car is from 1992
  • ChrisFix
    ChrisFix Год назад Time for a new car! This is a good excuse to get a Corvette because they dont rust since they are made of fiberglass ;)
  • Benjamin Guiheen
    Benjamin Guiheen Год назад Get a new car if the rust is to bad
  • Benjamin Guiheen
    Benjamin Guiheen Год назад Get a new car if the rust is to bad
  • pat1981lux
    pat1981lux Год назад The chassis of the Corvette is made of steel and it rusts easily. I owned a Corvette.
  • Matt
    Matt Год назад Rodwell Media what do you drive?
  • Matt
    Matt Год назад Roderickspeeder stainless steel is almost the same weight as aluminium...
  • Ionut Marius
    Ionut Marius Год назад Rodwell Media do u have a charger?
  • Sarem
    Sarem Год назад vimtut0r imagine how much gas you would use driving a heavy 100% steel car... lol im not going back to those model t's man I AINT DOING IT!!!!!!
  • emigrate
    emigrate Год назад But fibreglass has inherent problems, in that it breathes and you will get over time a fibreglass acne where the fibreglass is breathing and the gel coat and top coats cause issues. Also, fibreglass cars in an accident are a hazard.
  • Iedy Iedy
    Iedy Iedy Год назад Stainless is good but it has a lot of weight and can even make accidents worse , imagine hitting a normal car with a stainless steel one at aroun 30mph, is gonna do more dmg
  • Gib bby
    Gib bby Год назад Rodwell Media do you have a mx5 miataz?
  • Gib bby
    Gib bby Год назад Rodwell Media what car?
  • Harrison Dell
    Harrison Dell Год назад Rodwell Media really?
  • Harrison Dell
    Harrison Dell Год назад That sucks
  • kennythemeat
    kennythemeat Год назад the DMC DeLorean does exactly that. and it looks great!
  • FalloutNewNarwhal.Loopy.Tom
    FalloutNewNarwhal.Loopy.Tom Год назад I'll buy your rust for $20
  • EarthClad
    EarthClad Год назад Rodwell Media damn
  • Colton Walker
    Colton Walker Год назад Ask Saturn.
  • CaptainFoufeu
    CaptainFoufeu Год назад João Maurício Basile de Souza In that case, if the plane crashes into a mountain, the plane will take the mountain with it.
  • Justin
    Justin Год назад Stainless can also rust, pit, and corrode when it is covered, due to moisture getting into pits and exposure to salts, sulfur, or dissimilar metals. It's only stainless in areas that are constantly exposed to oxygen and free of minerals.
  • GamingDol
    GamingDol Год назад Weight aswell
  • Lochie Brown
    Lochie Brown 11 месяцев назад Rodwell Media Yep XD
  • Brent Werks
    Brent Werks 10 месяцев назад clearly you have never picked up a piece of aluminum and a piece of stainless steel near the same size: Density of aluminum is around 169 pcf (pounds per cubic foot), stainless is around 494 pcf, and there have been cars made with stainless body , most famously the DeLorean DMC-12 (from back to the future) also stainless is very expensive to mass produce anything out of.
  • Stanlley Pajdak
    Stanlley Pajdak 9 месяцев назад Your car must be a big piece of shit
  • Sarunas G
    Sarunas G 9 месяцев назад You better dont!
  • CincoJayMaio
    CincoJayMaio 9 месяцев назад Veeti Jaakkola replacing a whole panel does not save a ton of work
  • Jose Taborr
    Jose Taborr 9 месяцев назад I have to get new cab corners😭😭
  • Jedi Master Joe
    Jedi Master Joe 9 месяцев назад You don’t own a car you fucking 6 year old
  • Feral Cypher
    Feral Cypher 8 месяцев назад damn lol
  • artax84z
    artax84z 8 месяцев назад I know the feeling I have a 1968. I was able to get a door from Stephans Performance, Shipping cost more than the door, but they do go to Car shows and if it is near you you can pick it up at the show and save shipping.
  • Lord Sandwich
    Lord Sandwich 8 месяцев назад arekb5 Some cars are made out of fibreglass, so kind of the same thing...
  • Lord Sandwich
    Lord Sandwich 8 месяцев назад João Maurício Basile de Souza The memory in the black box is already more resilient than a human being. Modern aircraft store their black box data on SSDs which can handle some pretty extreme conditions on their own. But to answer your question, it would probably make the plane so heavy that it wouldn't fly at all.
  • JediWitness2
    JediWitness2 8 месяцев назад (изменено) ThePointlessBox_ - Maybe.. But Delorean did it and other than it being plagued by mechanical issues, it worked perfectly fine as far as the body went. Also works perfectly for building time machines to of course¡ 😂
  • Andros Kai
    Andros Kai 8 месяцев назад ME TOO
  • David
    David 7 месяцев назад RIP
  • Stolen Phone
    Stolen Phone 7 месяцев назад @JediWitness2 Actually, the Delorean DMC-12 was a very heavy car, to save weight they made the undercarriage and frame from fiberglass, in crash tests it was know to send the engine, that was located in the rear of the car, through the firewall to crush the occupants, they had a bad tendency to flex when on uneven terrain, and due to that issue the glass would break for what seemed to be no reason. John Delorean, the creator of the DMC-12 went bankrupt because his cars were heavy, slow, and expensive, and the reason why they were so bad, is because they were stainless steel.
  • Adly Mz
    Adly Mz 7 месяцев назад haha you are so funny bro
  • anpredictable
    anpredictable 7 месяцев назад U need a new car thats whar u need
  • Philipp
    Philipp 7 месяцев назад i would have to do this to my whole hole car aswell :D
  • Mafia Studios
    Mafia Studios 7 месяцев назад You don’t even own a license
  • jeffy dabber
    jeffy dabber 7 месяцев назад sad
  • ItzMeLuiz
    ItzMeLuiz 6 месяцев назад Just buy a new car
  • Brodie's life
    Brodie's life 6 месяцев назад Haaaaaaaa!!!!
  • Picato75
    Picato75 6 месяцев назад Buy POR PATCH!!! I used it for 15 years now.
  • LivingIn2007
    LivingIn2007 6 месяцев назад Rodwell Media Haven't seen mine bro. I got rust INSIDE. Some in the air conditioning
  • J. B.
    J. B. 6 месяцев назад ​@Rodwell Media Nice, 1969 was a GREAT year for (is it an) American car(s).
  • Andrew Baker
    Andrew Baker 6 месяцев назад 😂😂😂
  • mecanicien37
    mecanicien37 6 месяцев назад right too expensive and heavy @vimtut0r
  • HondaMan Vtec
    HondaMan Vtec 6 месяцев назад 😆😆😆😆😆
  • Village TV
    Village TV 5 месяцев назад 💝💚 COOL VIDEO! 💝💚
    I BROKEMYOWNHEART 5 месяцев назад Hope the paint in your car isn’t too special :)
  • Micky Tee
    Micky Tee 4 месяца назад Just rip the car apart sell the parts and buy a new car
  • J Bennett
    J Bennett 4 месяца назад Rodwell Media I’m not helping you 🖕🏻🖕🏻
  • CoolDerek100
    CoolDerek100 4 месяца назад At this point just buy a new car
  • Nick Stalburg
    Nick Stalburg 4 месяца назад MX5?
  • kimchee94112
    kimchee94112 4 месяца назад @Roderickspeeder just too damn expensive. SS add about 150 pounds more but don't need primer, paint and top coat which add back about 80 pounds. Delorean was SS, cool looking car.
  • Joey Splats
    Joey Splats 4 месяца назад Dat's OK I gotta do it to my whole life. Lotsa Bondo and 40-grit.
  • James Linkous
    James Linkous 4 месяца назад @ChrisFix Bodies are fiberglass, but frames are steel and subject to the same rust. Dang it.
  • CorvetteCarCraft
    CorvetteCarCraft 4 месяца назад Got a mercedes?
  • Cool James
    Cool James 4 месяца назад good luck with that
  • Carlos Rios
    Carlos Rios 3 месяца назад @Rodwell Media nice
  • Dat Boii
    Dat Boii 3 месяца назад @Roderickspeeder stainless steel is lighter and stronger than shitty sheet metal
  • Chicagorilla
    Chicagorilla 3 месяца назад Lol
  • BOT_Death
    BOT_Death 3 месяца назад I feel you man. Got a 53 Ford to rust repair into oblivion
  • barack obama
    barack obama 3 месяца назад Sell it to the scrap yard and with the money buy a new car.
  • Conny Van den Bosch
    Conny Van den Bosch 2 месяца назад in that case you may consider to go for a ratrod look, will save you a lot of time and money
  • Arthur Meiers
    Arthur Meiers 1 месяц назад @vimtut0r Carbon fibre!!!
  • VortechBand
    VortechBand 1 месяц назад Or just a full plastic/carbon fiber cover :) It's not like steel bodywork keeps you safe in a crash either.
  • Gamer du Québec
    Gamer du Québec 6 дней назад @alex pencek Its not because someone looks like he's 13 that he's 13...Plus at any age you can have a car, just don't drive it. If I had the space, I would get a rusty car from a junkyard and try to restore it as a project car, or just buy a very cheap car and do something with it. All you need is the money, the space for the car and some knowledge
  • hughaxton
    hughaxton 2 дня назад Corvettes have always been made from fiberglass reinforced bondo. . .
  • zakaria adam
    zakaria adam 4 месяца назад hey guysss Man you are just amazing
  • jay long
    jay long 1 месяц назад From an x body shop mechanic not bad for a backyard body shop repair .I'm really impressed
  • Andrew R
    Andrew R 3 месяца назад Thanks for this video ChrisFix, subscribed! Also, wondering what the procedure would be for fiberglass parts. For example the front grill of a 2000 Jeep Cherokee (not Grand) that is pitted from rocks etc...
  • ChrisFix
    ChrisFix 3 месяца назад You follow a similar procedure but use the gold filler on the pitted area and sand it down so it’s smooth and then fill. They mighty even make a filler for plastic.
  • Alparslan Ali Alp
    Alparslan Ali Alp 1 месяц назад At Turkey, Stuff look at the damaged area... 5 sec later, still looking at damaged area...hmmm 10 sec later, hmmm... 15 sec...It looks realy bad, let's paint whole car
  • nishok.z32
    nishok.z32 Год назад Who else doesnt need to do this but just watches it because it's satisfying to watch rust go away
  • Henry Amaya
    Henry Amaya Год назад Nishok__ me
  • Seldon Rios
    Seldon Rios Год назад I don't even own a car.
  • Shagan Singh
    Shagan Singh Год назад Nishok__ I'm 9 and I can't even drive a car I just watch is because I love cars
  • tonytonez
    tonytonez Год назад I bought a new car so def want to take better care as this is my 5th car and want to ride it into the mist of Avalon.
  • HondaMan Vtec
    HondaMan Vtec 9 месяцев назад @tonytonez what did you buy ?
  • Ian Bosman
    Ian Bosman 8 месяцев назад red one :)
  • Jeff Rallison
    Jeff Rallison 6 месяцев назад true! Like watching sandblasting...so satisfying.
  • Infinity Playz
    Infinity Playz 6 месяцев назад nishok.z32 all the time
  • ornate hammer
    ornate hammer 5 месяцев назад I got a rusty beater car but as i can see it takes a long time and my car is not worth all that time, it's gonna fall apart anyways before it gets eaten by rust but i live in UK, here the cars are dirt cheap , in USA would make sense to fix the rust.
  • axtra92
    axtra92 4 месяца назад Rust go away? Are you blind? Its still there..